HIMORE FOOD MACHIENRY-PRODUCT PAGE

Popular 0.5~6t/h UHT Fruit Juice Sterilization Machine

This UHT fruit juice sterilization machine also named Ultra-high temperature instant sterilization machine . It adopts a sleeve structure, which is efficient, energy-saving and simple to operate. The temperature is generally 115-135°C, and the sterilization time is 4-10 seconds.

The fruit juice sterilization machine is suitable for instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverages, popsicles, and ice cream slurry, soy sauce, soy milk, condensed milk, alcohol, etc. It can also be used for the sterilization of fluid materials.

Share with:

Product Category

Description of UHT Fruit Juice Sterilization Machine:

This fruit juice sterilization machine also named Ultra-high temperature instant sterilization machine . It adopts a sleeve structure, which is efficient, energy-saving and simple to operate. The temperature is generally 115-135°C, and the sterilization time is 4-10 seconds.

The fruit juice sterilization machine is suitable for instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverages, popsicles, and ice cream slurry, soy sauce, soy milk, condensed milk, alcohol, etc. It can also be used for the sterilization of fluid materials.

According to the heating method, it is divided into two heating methods: steam heating UHT ultra-high temperature instantaneous sterilization machine and electric heating UHT ultra-high temperature instantaneous sterilization machine;

According to the material angle, it is divided into two kinds of materials: stainless steel 304 and stainless steel 316.

fruit juice sterilization machine

The working principle of UHT Fruit Juice sterilization machine:

The working principle of the fruit juice sterilizer is that the material is preheated by pumping the material into the heat exchange device of the cold and hot material in the sterilizer by a centrifugal pump, and then passes through a high-temperature barrel filled with high pressure, and the material is quickly heated to the sterilization temperature and kept for about 3 seconds before and after.In seconds, the microorganisms and enzymes in it are quickly killed. After the material leaves the high-temperature barrel, it is cooled by heat exchange with the cold material, and the temperature is generally <65°C.

If the next process needs to increase the temperature, it can be achieved by adjusting the angle shut-off valve or circulation, and vice versa, by connecting cooling water to reduce the discharge temperature.

The discharging is controlled by the throttle valve of the sterilizer, which can make the boiling point of the material higher than the maximum temperature while maintaining a certain pressure. During normal production, adjust this valve, the back pressure is generated by the driving force of the pump to overcome the spring pressure to control the flow, and it should be fully opened when cleaning the sterilizer. The circulating storage tank can be used to prepare acid and alkali solutions to effectively clean the scale on the inner wall of the coil. Due to the use of stainless steel three-way cock at the same time, the flow can be adjusted appropriately.

Features of UHT Fruit Juice Sterilization machine/UHT sterilizer:

  1. Continuous production, extremely short sterilization time.
  2. High-quality products can be obtained due to the short heating time.
  3. Due to the use of ultra-high temperature sterilization, the sterilization effect is particularly good.
  4. Used in series with centrifugal pump or high-pressure homogenizer, it has a wide range of applications and is suitable for the sterilization of high-viscosity materials.
  5. Since the heat exchanger with cold and hot materials is designed to have the economic effect of waste heat utilization, the steam consumption is small.

UHT sterilizer

Technical Data of Fruit Juice Sterilization Machine/UHT sterilizer:

Model HM-6L10 HM-6L20 HM-6L40 HM-6L60
Capacity 0.5~1t/h 1.5-2T/H 3-4T/H 5-6T/H
Sterilization temperature 115~135℃ 115-135℃ 115-135℃ 115-135℃
steam pressure <0.4MPa <0.4MPa <0.7MPa <0.78MPa
High temperature Heating Time 4~6S 4-6S 4-6S 4-6S
Output material temperature <65℃ <65℃ <65℃ <65℃
Power 2.2KW 2.2KW 4KW 5.5KW
Dimension 920*920*1400mm 1100*1100*1700 1200*1200*1800 1400*1400*2000
Weight 280kg 380KG 550KG 700KG

Tips:

  1. The parameters in the chart are all standard configurations. If clients have special requirement, please tell freely.
  2. The process parameters that need to be provided for the selection of UHT ultra-high temperature sterilization machine: material properties, capacity require, sterilization conditions, special requirements, etc.

More Products:

0.5T New Advanced Fruit Vegetable Juice Extractor Machine

Economical 280kg/h Sugarcane Juice Extractor Machine

Popular 120W Commercial Orange Juice Extractor

Hot Sale 32L Commercial Fruit Vegetable Blender Machine

Best Sale 2 channels Automatic Mango Pulper Machine

Profitable 3~15L Fruit Vegetable Pulper Machine

Convenient A2000/3000 Commercial Juicer Machine for Fruit and Vegetable